The running costs per boxliter of the machine is 2-2.5 Euro.
One box consists of 6850 liters times 2,5 = 17,125.0 Euros.
Cost per full set of project 1 = 15.70 Euro
Cost per full set of project 2 = 8.10 Euro
Please be aware, I calculated a full run of the machine for each project.
1 m³ has 1000 litre and one box of the vx4000 needs 60h.
with an estimated running time of a VX4000 of 4000 hours per year you
will have costs of about 2-2,5€ per box litre of sand.
I would, if I knew what you mean.
I sent you just the possible qty. of one single print of a VX4000, based
on the project data you sent.
Not more.
If you need other figures, please tell me which one.
( Project 1 is 4 pieces) that means 1100 times from every pieces ( 4400 pies )
correct / 60 hours
project 2 is 2 pieces 1050 / Means 2100 piece ) / 60 Hours
That’s correct!
( Project 1 is 4 pieces) that means 1100 times from every pieces ( 4400
pies ) correct / 60 hours
project 2 is 2 pieces 1050 / Means 2100 piece ) / 60 Hours
That’s correct!
is the machine VX2000 will do Half of this amount ?
The VX4000 has 6,85m³ and the VX2000 has 2m³ of printable volume,
so the amount will be at the most 1/3 of the VX4000.
This is only a roughly calculation, besides of volume there are some
other technical differences like layer speed etc. so you can’t compare
them in equal measure.
So please take my figures just as rough estimations.
on a VX4000 you can produce within 60h….
1100 times project 1
Or
1050 times project 2
Or
1900 times project 3
Or
1100 times project 4
Or
2700 times project 5
Or
250 times project 6